德國DICTATOR-TECHNIK成立于1932年，成為18個的代表，DICTATOR-TECHNIK成品領域包
括電梯技術、門鎖技術、**技術、門和門驅動技術、消防驅動技術、消防技術、氣彈
簧技術、阻尼技術等。制造工廠在德國、荷蘭、西班牙、英國等地。
DICTATOR是氣彈簧生產廠家。目前有近40個辦事處或工廠！其產品具有規格齊全性能穩
定等特點。現在，我國的備件市場，特別是行業，經常可以見到DICTATOR氣彈簧。
氣動彈簧603138 5000NKT.NR..09373.321.001001 ID-NO:00 117 385 ZN 3804-C 37*52 BOAX-B 3G6K6GK-P DN80 NC with a feedback device HPH 250-401,Sn:997097090800030003 DN80 PN16 KSR 20.40 ST WAFER MTC V 50/8 03.1-10.61 MAT-NO:00117 385 VTF80-255(6749000070) ETABLOC,GN.032.125.1/222,G10 ETABLOC,GN.040.125.1/222,G40 MTCV50/5B-04.110.63(6-P92-821009/2003 Multitec A50/ 3C-4.1 23.55 9971581392/000100/01 Movitec VCF 18/8 SN:42/2009/790732-02 TUC/CA/EPDM ETANORM SYA 040-200 SYAB Ausf , Id-Nr:6-915-124211/1 , Q=40m3/H, H:52,51 ,n=2900u/m,Jahr 2002 MTC/A/65/09-06.1-22.62/Q=75m3/h/H=250.2m/N:2300r/min ,Nr : 6-N90-854034 ETABLOC GN 040-160/074-G9 9970945002 000200 01 LR-155MM MTC/A/65/09-06.1-22.62/Q=75m3/h/H=250.2m/N:2300r/min 6-N90-854034 021-M43K/125-00 NLT400-500×5S-023 NLT400-500×5S-024 NLT400-500×5S-015 NLT400-500×5S-016 DZ122×106×82，NLT400-500×5S-021 DZ85×71×82，NLT500-570×4S-043 DZ138×118×110，NLT400-500×5S-022 SP06 DZ118×100×193，NLT500-570×4S-016 DZ144×134×20，NLT500-570×4S-022-02 NLT500-570*4S GN40-160/522.2 GN32-160/402 2*21 400℃ 40MPa WITH 20G ф76×13 V-Ring/PART NO. 411; V-35 S; MATERIAL: NBR 60 Casing Wear Ring/PART NO.502.1; 135/145*10MM; MATERIAL: 1.4408 Casing Wear Ring/PART NO.502.2; A 150/165*12MM; MATERIAL: 1.4408 Shaft/PART NO. 210; Φ28/38*200 MM; MATERIAL: 1.4571 Joint Ring/PART NO. 411; A 17 * 21 MM; MATERIAL: DPAF 2 O-Ring/PART NO.412.1;280*4MM; MATERIAL: ENM-THERBAN Casing Wear Ring/PART NO.502.1;80/100*18.5MM; MATERIAL: 1.4571 Casing Wear Ring/PART NO.502.2;107/114*25MM;MATERIAL: A4 Shaft/PART NO.210; Φ38/55*218MM;MATERIAL:1.4571 Casing Wear Ring/PART NO.502.1;62/83*14MM;MATERIAL:A4 Casing Wear Ring/PART NO.502.2;86/103*24MM;MATERIAL:A4 Shaft/PART NO.210;Φ32*390MM;MATERIAL:1.4462 Flat Gasket/PART NO.400.3;20/24*0.3MM;MATERIAL:DPAF V-Ring/PART NO.411;V-25 S;MATERIAL:NBR60 Casing Wear Ring/PART NO.502.1;90/105*8MM;MATERIAL:1.4408 Casing Wear Ring/PART NO.502.2;100/115*8MM;MATERIAL:1.4408 Shaft Sleeve/PART NO.523;A 20.4/28*50MM;MATERIAL:1.4571 Shaft/PART NO.210;Φ35*186MM;MATERIAL:1.4571
